How to Get Green off Pressure Treated Wood

How to Get Green off Pressure Treated Wood (Simple Hacks in 2022)

If you’re looking for How to get Green off Pressure Treated Wood, you’re in the right place.

Pressure-treated wood is a popular process for both residential and commercial projects because of its durability and price. While pressure treatment protects the wood from rot and pests, it can also leave behind a greenish tint that’s not always desirable.

In this blog post, we’ll go over a few different ways that you can remove the stain and get your wood back to its original state. We’ll also provide some tips on how to prevent future staining from occurring. So, whether you’re trying to clean up an old project or are just getting started with pressure-treated wood, read on for some helpful advice!

What Is Green Algae on Wood?

Algae is a slimy, green film that grows on wood in damp or humid conditions. Algae is not harmful to humans, but it can be unsightly. Green algae on wood are commonly found on decks, fences, and other outdoor structures.

Algae thrive in warm, moist conditions. They are often found in shady areas where there is little airflow. Wet weather can also cause algae to grow more quickly.

Green algae on the wood are most often caused by a type of algae called Chlorella pyrenoidosa. This type of algae is common in fresh and saltwater. It can also grow on damp surfaces, such as wood.

Green algae on the wood are often mistaken for mold. Mold is a type of fungi that can cause health problems in humans. Unlike algae, mold is black, white, or green and has a fuzzy appearance. Mold can also grow on food and other surfaces.

Why It’s Important to Remove Algae From Your Pressure Treated Wood?

Algae and other types of growth can be unsightly on any type of wood, but it’s especially important to remove it from pressure treated wood. Pressure treated wood is designed to resist rot and decay, but it can still be damaged by algae and other growths. Algae can cause the wood to become discolored, and it can also hold moisture against the wood, which can lead to rot.

You will have a harder time removing algae than you would your average stain – it’ll regrow quickly if you don’t remove it properly, and it can be difficult to kill. However, with the right techniques, you can get rid of algae and prevent it from coming back.

How to Get Green Off Pressure Treated Wood (Few Easy Methods)

Green algae is an unsightly yet common problem for pressure treated wood. While the algae itself is not harmful, it can be difficult to remove and may indicate that your wood is not properly sealed. In this guide, we’ll show you a few different ways that you can remove the green tint from your pressure treated wood and help prevent it from coming back in the future.

Here are a few different ways that you can remove the stain and get your wood back to its original state:

  1. Use a Power Washer: Power washing is a quick and easy way to remove the green tint from your pressure treated wood. Simply point the power washer in the direction of the stain and let the machine do its work. You may need to go over the area multiple times to completely remove the stain.
  2. Scrub with Bleach: If power washing is not an option, you can try scrubbing the stain with bleach. Mix a solution of one part bleach to four parts water and apply it to the affected area with a sponge or brush. Scrub the area until the stain is gone and then rinse with clean water.
  3. Apply a Deck Cleaner: There are a variety of deck cleaners on the market that are specifically designed to remove stains from pressure-treated wood. Follow the instructions on the cleaner and apply it to the stain with a sponge or brush. Scrub the area until the stain is gone and then rinse with clean water.
  4. Paint over the Stain: If you’re looking for a more permanent solution, you can try painting over the stain. This will not only cover up the green tint, but it will also help protect the wood from future staining. Choose a paint color that closely matches the original color of the wood and apply it with a brush or roller. Let the paint dry completely before using the surface.
  5. Moss and Algae Removal Products: There are quite a few different products on the market that are specifically designed for removing moss and algae from pressure treated wood. Before using any of these products, be sure to read the instructions carefully and test the product on a small area of the wood to make sure it does not damage the surface.
  • 30 Seconds Outdoor Cleaner
  • Simple Green All-Purpose Cleaner
  • Wet & Forget Miss Muffet’s Revenge Spider Killer
  • Olympic Premium Deck Cleaner
  • Sunnyside 2 Minute Algae Scrubber
  1. Hydrogen Peroxide: Another cleaner you probably already have in your home is hydrogen peroxide. This can be used to remove the green tint from your pressure treated wood by mixing it with water in a 1:1 ratio. Apply the solution to the stain with a sponge or brush and scrub until the stain is gone. Rinse with clean water when you’re finished.
  2. White distilled vinegar: Both indoors and outdoors, white vinegar is considered a popular natural cleaner. The solution can be made by mixing one gallon of water with one cup of white vinegar and scrubbing the deck with the solution until the algae, mold, and mildew are gone.

How to Remove Green Algae from Pressure Treated Wood?

Besides these above methods, there are several other ways to remove algae from pressure treated wood. Some methods are more effective than others, and some will be better suited to your specific situation. Try out a few of these methods to see which one works best for you.

You can also use a pressure washer, a brush, or a chemical cleaner.

1- Pressure Washer:

A pressure washer is a machine that uses high-pressure water to clean surfaces. You can rent or buy a pressure washer, and they are available in different sizes for different jobs.

To use a pressure washer, you will need to add soap to the machine. There are special soaps made for pressure washers, or you can use mild dish soap. You will also need to wear protective clothing, including goggles and gloves.

Once you have all of your supplies, follow these steps:

  1. Set up the pressure washer according to the manufacturer’s instructions.
  2. Wet the surface of the pressure treated wood with low-pressure water.
  3. Apply the soap to the wood.
  4. Turn up the pressure and start washing the wood.
  5. Move the pressure washer back and forth as you work your way across the surface of the wood.
  6. Rinse the soap off with low-pressure water.
  7. Let the wood dry.

2- Brush:

If you don’t want to use a pressure washer, you can remove algae from pressure treated wood with a brush. You will need a stiff brush, such as a wire brush or scrub brush. You will also need gloves and eye protection.

To use a brush, follow these steps:

  1. Wet the surface of the pressure treated wood with water.
  2. Apply soap to the wood.
  3. Scrub the wood with a brush to remove the algae.
  4. Rinse the soap off with water.
  5. Let the wood dry.

3- Chemical Cleaner:

You can also use a chemical cleaner to remove algae from pressure treated wood. There are many different types of cleaners available, so be sure to read the labels carefully to find one that is safe for pressure treated wood. You will also need gloves and eye protection when using a chemical cleaner.

To use a chemical cleaner, follow these steps:

  1. Wet the surface of the pressure treated wood with water.
  2. Apply the cleaner to the wood.
  3. Scrub the wood with a brush to remove the algae.
  4. Rinse the cleaner off with water.
  5. Let the wood dry.

Preventing Future Staining:

To help prevent future staining, follow these useful tips.

  1. Apply a Sealer: One of the best ways to prevent staining is to apply a sealer to your pressure treated wood. This will create a barrier that will repel water and stains. Choose a sealer that is specifically designed for pressure treated wood and follow the instructions on the package for best results.
  2. Clean Regularly: It’s important to clean your pressure treated wood on a regular basis to prevent staining. If you see any dirt or debris on the surface, be sure to remove it right away. You can use a power washer, deck cleaner, or simply soap and water to keep the area clean. — To clean your pressure treated wood with SOAP, simply mix a mild soap with water and scrub the surface with a sponge or brush. Rinse the area with clean water and let it dry completely before using it.
  3. Inspect for Damage: Inspect your pressure treated wood regularly for any signs of damage. If you see any cracks, splits, or holes, be sure to repair them right away. This will help prevent water and stains from seeping into the wood and causing damage.
  4. Store Properly: When not in use, be sure to store your pressure treated wood in a dry and protected area. This will help prevent it from becoming stained or damaged. If possible, cover the wood with a tarp or sheet when not in use.

By following these simple tips, you can help keep your pressure treated wood looking its best for years to come.

Leave a Comment

Your email address will not be published.