How to Fix Slippery Travertine Pool Deck

How to Fix Slippery Travertine Pool Deck in 2022 – (Slip Resistant Solutions)

Searching for How to fix slippery travertine pool deck? You’ve come to the right place.

If you’re like most pool owners, you rely on your deck to provide a safe place to walk and lounge around the pool. But what do you do when your deck starts becoming too slippery to stand on?

If you have a travertine pool deck, then you know that it can be quite slippery when wet. In this blog post, we will show you how to fix this travertine pool deck problems and make your pool deck safe for walking again. Follow these steps and you will be able to walk on your deck without fear of slipping and injuring yourself.

How to Fix Slippery Travertine Pool Deck – Simples Steps:

Here are few steps to follow about how to make travertine less slippery:

1- Identify the Source of the Slippery Surface:

The first step is to identify the source of the slippery surface. Is it due to water pooling on the deck? Or is there another reason why the travertine tiles are becoming slick? Once you know the cause, you can then take steps to fix it.

Water Pooling:

If water is pooling on the deck, then you will need to take measures to prevent it from happening. One way to do this is to install a drain in the deck. This will allow the water to drain off instead of pooling on the surface.

Another solution is to create a slope on the deck so that the water will run off instead of pooling. You can do this by raising one end of the deck slightly so that the water will run towards the lower end.

If you have a lot of trees around your pool, then you may want to consider trimming them back. This will allow more sunlight to reach the pool deck and dry it out more quickly.

Non-Slip Coating:

Another solution is to apply a non-slip coating to the travertine tiles. This will provide a textured surface that will be less slippery when wet. There are many different types of anti slip pool deck coatingsĀ available, so be sure to choose one that is compatible with travertine.

Once you have applied the coating, allow it to dry completely before walking on the surface. You may need to apply multiple coats to achieve the desired level of slip resistance.

2- Clean the Travertine Surface with a Degreaser or Cleaner:

Cleaning the surface in a few steps.

  1. Moisten a clean cloth or sponge with the degreaser or cleaner.
  2. Rub the surface of the travertine with the moistened cloth or sponge.
  3. Rinse the travertine surface with clean water to remove any residue from the degreaser or cleaner.
  4. Allow the travertine to air dry completely.

3- Apply a Topical Sealant every few Years for extra Protection:

Applying a topical sealant to travertine is an easy way to help protect it from staining and wear. Sealant creates an invisible barrier on the surface of the stone that repels water and oil, making it harder for dirt and other materials to penetrate.

Sealing travertine is not a permanent solution, however, and will need to be reapplied every few years to maintain its effectiveness. If you live in an area with a lot of rain or snow, or if your pool deck is constantly exposed to sun and chlorine, you may need to seal more often.

To test if your travertine needs to be resealed, sprinkle a few drops of water on the surface and wait a few minutes. If the water beads up and does not absorb into the stone, it is still properly sealed. If the water soaks in, it’s time to reapply sealant.

Steps to Seal the Surface to Prevent Staining and Slipping:

Applying sealant is a quick and easy process which falls in good slippery pool deck solutions that can be done in a few simple steps:

  1. Choose a sealer that is specifically designed for use on travertine.
  2. Clean the surface of the travertine with a mild detergent and water to remove any dirt or debris.
  3. Allow the travertine to completely dry.
  4. Apply the sealant according to the manufacturer’s instructions. This usually involves pouring a small amount onto the surface and spreading it evenly with a brush or roller.
  5. Allow the sealant to dry completely before using the pool deck. This usually takes a few hours.

By following these simple steps, you can help protect your pool deck from stains and wear. Sealing travertine is an easy way to keep it looking its best for years to come.

FAQ’s:

Is Travertine too Slippery for the Pool deck?

No, travertine is not too slippery for the pool deck. In fact, it can provide a slip-resistant surface when properly installed and maintained.

What are the best ways to make Travertine less Slippery?

There are a few ways to make it less slippery:

  1. Install a textured surface. This can be done by adding a textured overlay or by etching the surface of the travertine.
  2. Use a sealer with a high slip resistance rating. This will help to create a more slip-resistant surface.
  3. Install anti-slip treads or mats. These can provide extra traction and help to reduce the risk of slipping.
  4. Keep the surface clean and free of debris. This will help to prevent slips and falls.
  5. Inspect the surface regularly for any signs of wear or damage. This will help to identify any areas that may need attention.

What are some Common Causes of Slippery Travertine Pool decks?

There are a few common causes of slippery pool decks:

  1. Lack of traction: This can be caused by a smooth or polished finish, which can create a slippery surface.
  2. Wet conditions: When the travertine is wet, it can become very slippery. This is why it is important to keep the surface dry and free of moisture.
  3. Debris: If there is debris on the travertine, it can create a slip hazard. This is why it is important to keep the surface clean and free of debris.
  4. Damaged or worn surface: If the travertine is damaged or worn, it can create a slip hazard. This is why it is important to inspect the surface regularly for any signs of wear or damage.

Leave a Comment

Your email address will not be published.